Over the past few days I have been working on the bathroom cupboards, the face frame went on OK so I worked on the doors. Once they were cut to size I ironed on the edge banding and gave them a bit of paint, then tried to fit them. I did say "tried", because they were a little large, so after a bit of sanding and a little more, and a after iroing on a couple of side with new edges, they received a fresh coat of paint and that was it. I picked up the hardware for the doors, European hinges and a spring loaded holder. We don't want handles and they won't really be access every daily. The left door hinges went on well and with a few adjustments it was done. The right one went on just as well except, when I removed some of the box in one corner to what I thought would make it fit better, it made the frame crooked. So to the table saw I went, squared it up by cutting off the frame, cleaning up the edge and re-attaching the frame, properly. Then the door went in square, after a bit of sanding it was done and now the touch up painting begins before I take them out and install them.
 |
The doors drying. |
 |
Everything in place. |
 |
They pop open nicely and now for the paint. |