Doors And Drawers Taking Shape

Since the counter top was installed I've been working on the cupboard doors and drawers. There wasn't much to see until today, because it's hard to show the groves and the tenon cuts. Each of the 72 boards were run through the table saw twice to center the grove and each of the rails had shoulder cuts then I used the tenon jig to cut away the scrap leaving tenons. And yesterday I picked up the plywood to finish them off. Today I assembled them, there are 9 drawers, 8 doors and 1 panel for the dishwasher. Next few steps are sanding, priming and painting.

Here they are glued and clamped together.